# Synology reverse proxy and plex

**URL:** <https://forums.spacerex.co/t/synology-reverse-proxy-and-plex/379>\
**Category:** Synology\
**Tags:** plex, reverse-proxy\
**Created:** [April 11, 2023, 9:58pm UTC](https://forums.spacerex.co/t/synology-reverse-proxy-and-plex/379 "2023-04-11T21:58:54Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![mzisu](https://forums.spacerex.co/letter_avatar_proxy/v4/letter/m/76d3ee/32.png) [@mzisu](https://forums.spacerex.co/u/mzisu)\
**Post date:** [April 11, 2023, 9:58pm UTC](https://forums.spacerex.co/t/synology-reverse-proxy-and-plex/379/1 "2023-04-11T21:58:54Z")

</div>

What am i doing wrong here?  
I setup reverse proxy on my DS918+ and configured it to route from DDNS port 443 to Plex server address on port 32400  
With no luck.  
Can someone help me on what the setup should look like?

---

<div class="post-metadata">

**Author:** ![Will](https://forums.spacerex.co/user_avatar/forums.spacerex.co/will/32/14_2.png) [@Will](https://forums.spacerex.co/u/Will)\
**Post date:** [April 12, 2023, 2:13pm UTC](https://forums.spacerex.co/t/synology-reverse-proxy-and-plex/379/2 "2023-04-12T14:13:34Z")

</div>

So that should be the correct setup for this. What is the issue you are having? Does the DDNS route to the Synology or what?

---

<div class="post-metadata">

**Author:** ![kris](https://forums.spacerex.co/letter_avatar_proxy/v4/letter/k/82dd89/32.png) [@kris](https://forums.spacerex.co/u/kris)\
**Post date:** [April 12, 2023, 9:42pm UTC](https://forums.spacerex.co/t/synology-reverse-proxy-and-plex/379/3 "2023-04-12T21:42:51Z")

</div>

Hello, I had issue with that before as well. Go to Settings\>Network\>Custom Server Access URL and then enter your reverse proxy’s domain there. It should work after that.

> **[Network](https://support.plex.tv/articles/200430283-network/)**
>
> These are network-related settings for your Plex Media Server. You can access these under Settings \> Server \> Network in...

### Custom server access URLs

A comma-separated list of URLs (either HTTP or HTTPS), which will be published to [plex.tv](http://plex.tv) for server discovery. This can be very useful in a few cases: if you’re using a VPN to get back home, if you’re using a reverse proxy in front of the media server, or if your networking configuration is otherwise unique. For instance, if you have your own custom domain with subdomain, you might add:

```auto
https://plex.mycustomdomain.com:32400

```