Directly access Synology Drive web client?

Synology
1

Is there a way using quickconnect to directly access my synology drive remotely? Something like quickconnect.to/username/synologydrive.

Thanks

2

Try this: http: or https://Your ID.direct.quickconnect.to/drive

3

Doesnā€™t work for me. Is there a specific port I should make sure is forwarded?

4

Yes, there is an alternate URL;

http: or https://Your ID .direct.quickconnect.to:RouterPort#

Go to the ā€œRouter Configurationā€ tab of your NAS. There are two port columns, Local Port & Router Port. Since you want to enter the NAS from outside your LAN you need to use the Router Port configuration for QuickConnect. If they are both the same number then you may have a bigger problem. Post a screen shot of what happens.

5

I canā€™t use the router configuration on the synology nas because I donā€™t have one of the listed routers.

Even if Iā€™m on the LAN and I type in the IP of the synology nas/drive it doesnā€™t work. For example 192.168.1.1/drive

image
image2286Ɨ1815 136 KB

6

I just donā€™t know enough about your setup to give you anymore constructive advice. If you canā€™t provide details about your LAN setup and the settings on the NAS and router then there is nothing I or anyone else can do. If you want help you need to provide details. That way we can know if I can help or not. Good luck.

7

Short answer: yes. But you need to set the alias ā€˜driveā€™ in Control Panel > Login Portal > Applications tab; select Synology Drive and fill in the alias.
No need to open ports.

8

That was it! It worked! Thank you both so much for responding.

1 Like